A286 Bolts Manufacturer, A286 Fasteners Supplier

A286 Hex Bolt, ASTM A286 Nuts, A286 Shoulder Nuts, ASTM A286 Threaded Rod, UNS S66286 Round Head Bolt, A286 Bolt Suppliers, A286 Screw Exporters in Mumbai, India.

A286 Bolts
A286 Bolts
A286 Fasteners
A286 Fasteners
A286 Nuts
A286 Nuts

Steel Tubes India Manufacture A286 Bolts which is an engineering alloy at least as resistant to corrosion as copper itself, but much stronger, and with good fatigue endurance. A286 is an alloy noted for its brazeability, strength, corrosion resistance, and electrical properties. A286 Bolt is one of the most weldable copper alloys fastener. It is readily joined by all types of resistance welding. Joining by soldering or brazing is excellent. Joining by gas shielded arc welding and spot welding is also excellent, and by oxyacetylene welding.

Steel Tubes India is a Largest Supplier of A286 Fasteners which include threaded bolts, wood screws and lag screws. A286 Screws and lag screws have unusually high strength and toughness, freedom from embrittlement, and a high degree of corrosion resistance to all types of water, saline fogs, and a wide variety of other corrosives.

Steel Tubes India Export A286 Washer which is the standard materials with yacht designers and the majority of builders of stock power boats. The A286 is also used for cable connectors, mast tangs, deck and pilot house hardware and equipment, welded fuel and water tanks for pleasure and commercial crafts. A286 is also one of the best copper alloys for pole line hardware.

Steel Tubes India Export A286 Alloy Nuts which are also widely used in boat construction and for nailing slate, heavy tile, and other materials where thread and corrosion resistance are essential. A286 Alloy can be annealed at temperatures between 483 and 677°C (900 and 1250°F). Applications and properties of this alloy are similar to that of UNS C64200 copper alloy.

A286 Stud Bolts, A286 Hex Head Bolt, DIN 1.4943 Round Head Bolts, A286 M10 Bolts, A286 Eye Bolt, A286 Wing Bolts, A286 Bolts Price in India

Table Of Contents

A286 Fasteners Specification

Length : 3 mm to 200 mm

Size : M02 to M30

Specification : ASTM A286

Standards : DIN, ASTM, BS and all International Standards

A286 Fasteners Packaging

  • - Bundles (hexagonal)
  • - Wooden Boxes
  • - Crates (steel/wooden)
  • - Packaging for ASTM A286 Fasteners as per customer's requirements

Special Features:

  • - Each bundle covered with plastic for protection against extreme weather.
  • - End of ASTM A286 Fasteners protected by plastic caps.
  • - Bundles strapped with plastic strips.
  • - Each radius of U-Bend tube separated by a separator.
  • - Packaging list (laminated) placed with box/crate.

Dimensional Standards Of A286 Fasteners

Grade / Class Strength
Grade A Nuts Strength exceeds Grade 2.
ASTM A325 Bolts meet ASTM A325 Type 1 standards for structural steel joints.
Grade B Nuts Strength is similar to Grade 5.
Grade B7 Threaded
Stud & Rod
Same as Grade 5. Use with Grade 2H and Grade nuts.
Grade Nuts Strength exceeds Grade 5. Use with heat-treated medium-strength steel fasteners like ASTM A325 structural bolts.
Grade G Nuts Strength is similar to Grade 8. Use with ASTM A325 structural bolts.
Grade 2 Low strength.
Grade 2H Nuts Strength is similar to Grade 5. Use with ASTM A325 structural bolts.
Grade 5 Medium strength.
Grade 8 High strength.
Metric Class 4 Similar to Grade 2.
Metric Class 8.8 Similar to Grade 5.
Metric Class 10.9 Similar to Grade 8.
Metric Class 12.9 The highest metric class for strength, it exceeds Grade 8.
A286 BOLTS AND SETSCREWS (NORMAL AND HEAVY SERIES) ANSI B18.2.1
DIN 931 933
BS 1083 1768 1769 3692
ISO 4014 4017
A286 SOCKET CAPSCREWS (1936 & 1960 SERIES)
ANSI B18.3
DIN 912 913 916 6912
BS 2470 4168
ISO 4762
A286 STUDBOLTS
ANSI B16.5
DIN 975 976
BS 4882
A286 NUTS (NORMAL AND HEAVY SERIES)
ANSI B18.2.2
DIN 934
BS 1083 1768 1769 3692
ISO 4032
A286 ENGINEER STUDS DIN 938 939 2510
BS 2693 4439 4882
A286 WASHERS Flat Tab Spring Special designs

Thread Forms for A286 Fasteners, Studs & Bolts

ALL FASTENERS CAN BE SUPPLIED WITH THE FOLLOWING THREAD FORMS:
METRIC Metric fine Metric coarse
UN UNC UNS
UN8 UNF
WHITWORTH BSW BSF

ANCILLARY PROCESSES of A286 Fasteners, Bolts, Nuts

HEAT TREATMENT Quenching and tempering Thru Hardening
Normalising Solution Annealling
Nitriding Precipitation Hardening
Case Hardening
COATINGS Zinc Phosphate
Zinc Nickel Molykote
Hot Dip Galv Sherardizing
PTFE/Xylan/Xylar/Teflon Cadmium

A286 Bolts- DIN 933, 931, 603, 571, 912, 7991, ISO-7380.

A286 Bolts Type: BOLTS, SETS, CUP SQUARE, COACH SCREW, SOCKET CAP, SOCKET COUNTERSUNK, SOCKET BUTTON

A286 Screws Type SIZE GRADE ASME ISO ASTM
A286 Socket Head Cap Screw M1.6 to M64 12.9 B18.3.1 M 4762 A574M
A286 Socket Low Head Cap Screw M4 to M20 10.9      
A286 Socket Head Shoulder Screw M6 to M24 012.9 B18.3.3M    
A286 Countersunk Socket Head Screw M3 to M20 012.9 B18.3.5M 10642 F835M
A286 Button Head Socket Screw M3 to M12 012.9 B18.3.4M 7380 F835M
A286 Flange Button Head Socket Screw M3 to M10 012.9     F835M
A286 Knurled Point Socket Set Screw M3 to M20 45H B18.3.6M 4029 F912M
A286 Flat Point Socket Set Screw M6 to M12 45H B18.3.6M 4026 F912M
A286 Dog Point Socket Set Screw M3 to M20 45H B18.3.6M 4028 F912M
A286 Cone Point Socket Set Screw M3 to M12 45H B18.3.6M 4027 F912M
A286 Plain Point Socket Set Screw M3 to M20 45H B18.3.6M 4029 F912M
A286 Taper Pressure Plug M8 to M22 -      

A286 Bolt Type SIZE PROPERTY CLASS TENSILE STRENGTH STANDARD
A286 Hex Head Bolt / Screw M4 to M80 10.9 1040N / mm2 min ISO 4017 (Full Thread)
ISO 4014 (Half Thread)

A286 Nuts Type SIZE PROPERTY CLASS STANDARD
A286 Hex Nut M6 to M42 10 ISO 4032
A286 Nylock Nut M6 to M20 (Gr.8)
M10 to M24 (Gr.10)
8 & `10 DIN 982
A286 Nylock Nut M6 to M20 (Gr.8)
M10 to M24 (Gr.10)
8 & 10 DIN 985
A286 Hex Weld Nut M6 to M12 8 DIN 929

A286 Washers Type SIZE HARDNESS STANDARD
Square Section Spring Washer, A286 3mm to 39mm HV (430 to 530) DIN 7980
Flat Section Spring Washer, A286 3mm to 39mm HV (430 to 530) DIN 127 B
Hardened Washer, A286 12mm to 30mm HV (300 to 370) IS 2016
Hardened Steel Washer, A286 12mm to 56mm Rockwell 26 to 45 (HDG)
Rockwell 38 to 45 (Coated)
ASTM F436M

Durlok® - Anti Vibration

Anti vibration bolts and nuts SIZE PROPERTY CLASS TENSILE STRENGTH STANDARD
Durlok® Bolt M6 to M20 12.9 1220N / mm2 min As Per Unbrako Specification
Durlok® Nut M6 to M20 12 Hardness HRC 28 to 36 As Per Unbrako Specification
Durlok®Washer M6 to M20 HRC 47 to 52 As Per Unbrako Specification

Full Range of Fastener Products both Imperial & Metric. Dimensions range from M3 to M72 and quantities from 1 to 10,000.

Hexagon Bolts / Set Screws Stud Bolts Hexagon Nuts Socket Cap screws
DIN 931 BS4882 DIN 934 DIN 912
DIN 933 DIN 976 BS 1768 DIN 6912
BS 1768   BS 1769 DIN 7984
UNI 5731   BS 1083 ANSI B18.3
UNI 5739   BS 3692 ISO 4762
ISO 4014   ISO 4032 UNI 5931
ISO 4017   ISO 4033 BS 2470
BS 1769   ANSI B18.2.2 BS 4168
BS 3692      
ANSI B18.2.1      
Socket & Slotted Set Screws Socket & Slotted Countersunk Screws Studs Washers
DIN 913 DIN 963 DIN 938 DIN 125
DIN 914 DIN 7991 DIN 939 DIN 9021
DIN 915 BS 4168 DIN 2510 BS 4320
DIN 916 BS 1981 BS 4439 BS 3410
DIN 551 BS 483 BS 2693  
DIN 553 BS 2470   Spring Washers
DIN 438     DIN 127
BS 4168     BS 4464
      BS 1802
  • Hex Head Bolts ISO 4014 (DIN 931), A286 655
  • Hex Head Set screws ISO 4017 (DIN 933), A286 655
  • Hex Head Flange Bolts ISO 1665 (DIN 6921), A286 655
  • Slotted Hex Head Setscrews (DIN 933), A286 655
  • Socket Head Cap Screws ISO 4762 (DIN 912), A286 655
  • Socket Head Cap Screws With Fine Thread ISO 4762 (DIN 912), A286 655
  • Socket Head Cap Screws With Full Thread ISO 4762 (DIN 912), A286 655
  • Unbrako Socket Head Cap Screws ISO 4762, A286 655
  • Torx Head Cap Screws ISO 14579 (sim. DIN 912), A286 655
  • Socket Low Head Cap Screws DIN 7984, A286 655
  • Torx Cap Screws With Low Head ISO 14580 (sim. DIN 7984), A286 655
  • Socket Head Button Screws ISO 7380 part 1, A286 655
  • Unbrako Socket Head Button Screws ISO 7380, A286 655
  • Torx Button Screws, A286 655
  • Pin Torx Button Screws, A286 655
  • Socket Head Button Screws With Flange ISO 7380 part 2, A286 655
  • Slotted Mushroom Head Screws, A286 655
  • Phillips Pan Head Machine Screws ISO 7045 (DIN 7985H), A286 655
  • Pozi Pan Machine Screws ISO 7045 (DIN 7985Z), A286 655
  • Phillips Raised Csk Machine Screws ISO 7047 (DIN 966H), A286 655
  • Pozi Raised Csk Machine Screws, A286 655
  • Phillips Csk Machine Screws ISO 7046 part 1 & 2 (DIN 965H), A286 655
  • Pozi Csk Machine Screws ISO 7046 part 1 & 2 (DIN 965Z), A286 655
  • Slotted Raised Csk Machine Screws ISO 2010 (DIN 964), A286 655
  • Socket Head Countersunk Screws ISO 10642 (DIN 7991), A286 655
  • Unbrako Socket Head Countersunk Screws ISO 10642, A286 655
  • Slotted Csk Machine Screws ISO 2009 (DIN 963), A286 655
  • Torx Csk Head Screws ISO 14581, A286 655
  • Pin Torx Countersunk Screws, A286 655
  • Slotted Cheese Head Machine Screws ISO 1207 (DIN 84), A286 655
  • Slotted Pan Machine Screws ISO 1580 (DIN 85), A286 655
  • Torx Pan Head Screws ISO 14583, A286 655
  • One Way Security Screws, A286 655
  • Slotted Capstan Screws (DIN 404), A286 655
  • Flat Point Grub Screws ISO 4026 (DIN 913), A286 655
  • Cone Point Grub Screws ISO 4027 (DIN 914), A286 655
  • Cup Point Grub Screws ISO 4029 (DIN 916), A286 655
  • Dog Point Grub Screws ISO 4028 (DIN 915), A286 655
  • Carriage Bolts DIN 603, A286 655
  • Carriage Bolts and Nuts DIN 603 (Bolt) DIN 934 (Nut), A286 655
  • Wing Screws DIN 316 American Form, A286 655
  • Thumb Screws High Type (DIN 464), A286 655
  • Slotted Thumb Screws High Type (DIN 465), A286 655
  • Dowel Screw (Hanger Bolt) with metric and wood thread, and central hex drive, A286 655
  • Threaded Rods DIN 975, A286 655
  • Plastic Head Covers for Hex Screws/Nuts, A286 655
  • Full Hex Nuts Standard Pitch - ISO 4032 (DIN 934), A286 655
  • Full Hex Nuts Fine Pitch - ISO 8673 (DIN 934), A286 655
  • Full Hex Nuts With Left Hand Thread (DIN 934), A286 655
  • Half Nuts Coarse Pitch ISO 4035 (DIN 439 part 2), A286 655
  • Half Nuts Fine Pitch ISO 4035, A286 655
  • Half Nuts With Left Hand Thread, A286 655
  • Thick Nyloc Nuts (Type P) ISO 10512 (DIN 982), A286 655
  • Thin Nyloc Nuts (Type T) ISO 10511 (DIN 985), A286 655
  • Aerotight All Metal Locking Nuts, A286 655
  • Stover Nuts, A286 655
  • Dome Nuts DIN 1587, A286 655
  • Dome Nyloc Nuts DIN 986, A286 655
  • Cap Nuts DIN 917, A286 655
  • Hex Serrated Flange Nuts EN 1661 (DIN 6923), A286 655
  • Hex Plain Flange Nuts, A286 655
  • Hex Plain (Non-Serrated) Flange Nuts with Nylon Insert, A286 655
  • Hex Serrated Flange Nuts with Nylon Insert, A286 655
  • Hexagon Nut (Type B) with height 1.5 x thread diameter, A286 655
  • Hexagon Nut with Collar and height 1.5 x thread diameter, A286 655
  • Wing Nuts DIN 315 American Form, A286 655
  • Wing Nuts DIN 315 German Form, A286 655
  • Thumb Nuts High Type DIN 466, A286 655
  • Square Nuts, A286 655
  • Square Thin Nuts, A286 655
  • Sleeve Nuts With Pan Head and Slot, A286 655
  • Studding Connector Nuts, A286 655
  • Castle Nuts DIN 935, A286 655
  • Hexagon Coupler Nut, A286 655
  • Round Coupler Nut, A286 655
  • Counter Nuts DIN 7967, A286 655
  • Hexagon Weld Nuts, A286 655
  • Square Weld Nuts DIN 928, A286 655
  • Cage Nuts - Metric Thread, A286 655
  • Pronged Tee Nuts (4 Prongs), A286 655
  • Slotted Round Nuts for hook spanner DIN 1804, A286 655
  • Plastic Head Covers for Hex Screws/Nuts, A286 655

Equivalent Grades Of A286 Fasteners

ASTM UNS British Standard Werkstoff
A286 S66286 HR 52/650 1.4943

1.4944

A286 Fasteners Industrial Applications

  • Aircraft: Hydraulic Pressure Lines
    Electrical: Pole Line Hardware, Motors, Rotor Bar
    Fasteners: Screws, Rivets, Burrs, Nuts, Nails, Cotter Pins, Clamps, Bolts, Hinges
    Industrial: Screen Cloth, Wear Plates, Screen Plates, Shafting, Wire, Welded Pressure Vessels, Oil Refinery Plumbing Tube, Bearing Plates, Butts, Bushings, Cable, Channels, Chemical Equipment, Heat Exchanger Tubes, Kettles, Hydraulic Pressure Lines, Tanks, Piston Rings, Doctor Blades, Paper Industry, Pressure Vessels, Welded Tanks
    Marine: Propeller Shafts

A286 Fasteners Mechanical Properties

Test
Temperature

0.02% Offset
Yield Strength

0.2% Offset
Yield Strength

Tensile
Strength

%
Elongation
in 2"
(50.8 mm)

%
Reduction
of Area

°F

°C

ksi

MPa

ksi

MPa

ksi

MPa

70

21.1

90

621

95

655

145

1000

24.0

45.0

400

204

76

524

93.5

645

143

986

21.5

52.0

800

427

72

496

93

641

138

951

18.5

35.0

1000

538

62

427

87.5

603

131

903

18.5

31.0

1100

593

64.5

445

90

621

122

841

21.0

23.0

1200

649

62.5

431

88

607

103.5

714

13.0

14.5

1300

704

68.5

472

86

593

86.5

596

11.0

10.0

1400

760

44.5

307

62

427

64

441

18.5

23.0

1500

816

31

214

33

228

36.5

252

68.5

37.5

A286 Fasteners Physical Properties

Density lb/in3

0.286 solution treated

0.287 aged

Melting Range °F

2500-2600

A286 Fasteners Chemical Composition

Element

Min

Max

Carbon

--

0.08 max

Manganese

--

2.00 max

Silicon

--

1.00 max

Chromium

13.50

16.00

Nickel

24.00

27.00

Molybdenum

1.00

1.75

Iron

--

Balance

Titanium

1.90

2.30

Vanadium

0.10

0.50

Aluminum

--

0.35 max

Boron

0.003

0.010

Manufacturer Of Following A286 Fasteners

Types Of A286 Nuts

A286 Nuts

A286 Nuts

A286 Hexagon nuts 
with flange

A286 Nuts

A286 Hexagon nuts 
with flange

A286 Nuts

A286 Hexagon nuts with flange with metric fine thread

A286 Nuts

A286 Hexagon nuts with (non-metallic insert) type1

A286 Nuts

A286 Hexagon nuts with (all-metal nuts), type 2

A286 Nuts

A286 Hexagon nuts, style 1 – Product grades A and B

A286 Nuts

A286 Hexagon nuts, style 2 – Product grades A and B

A286 Nuts

A286 Hexagon nuts, low type (chamfered)

A286 Nuts

A286 Low hex nuts without bevel – Classification B

A286 Nuts

A286 Hexagon nuts, style 1, with metric fine thread

A286 Nuts

A286 Hexagon nuts, style 2, with metric fine thread

A286 Nuts

A286 Low hex nuts (chamfered) with metric fine pitch thread

A286 Nuts

A286 Hexagon nuts with flange and (with non-metallic insert)

A286 Nuts

A286 Hexagon nuts with metric fine thread

A286 Nuts

A286 Hexagon nuts with (all-metal nuts)

A286 Nuts

A286 Hexagon nuts with clamping part

A286 Nuts

A286 Hexagon nuts with low form, (with non-metallic insert)

A286 Nuts

A286 Castle nuts low form (with roll crown)

A286 Nuts

A286 crown nuts (without roll crown)

A286 Nuts

A286 crown nuts (with roll crown)

A286 Nuts

A286 Castle nuts low form (without roll crown)

A286 Nuts

A286 Hexagon nuts

A286 Nuts

A286 Closed nuts

A286 Nuts

A286 Cross hole nuts

A286 Nuts

A286 slot nuts

A286 Nuts

A286 locknuts

A286 Nuts

A286 knurled

A286 Nuts

A286 knurled nuts, low form

 

 

Type of A286 Screws

A286 Cap Screws

A286 Screws

ISO 1207 A286 Slotted cheese head screws

A286 Screws

ISO 7048 A286 H cylinder head screws with cross recession, shape H

A286 Screws

ISO 7048 A286 Z cylinder head screws with cross recession, shape Z

A286 Screws

ISO 1580 A286 flat head screw, product grade A

A286 Screws

ISO 7045 A286 H flathead screws with Phillips, form H – Product grade A

A286 Screws

ISO 7045 A286 Z flathead screws with Phillips, form Z – Product grade A

A286 Screws

ISO 21269 A286 Machine screws with hexagon and metric fine thread

A286 Screws

ISO 4762 A286 Machine screws with hexagon

A286 Screws

ISO 14579 A286 cheese head screws with hexagon socket

A286 Screws

ISO 14580 A286 cheese head screws with hexagon socket, low head

A286 Screws

ISO 7380-1 A286 screw with flattened Panhead – Part 1: Bolts with flattened Panhead with Allen

A286 Screws

ISO 14583 A286 flat-head screws with hexagon socket

A286 Screws

CSN 02 1128 A286 capstan screw

A286 Screws

DIN 920 A286 flat head screws with small head

 

A286 Screws

A286 Screws

ISO 4026 A286 screws with hexagon socket flat point

A286 Screws

ISO 4027 A286 screws with hexagon socket and flattened tip

A286 Screws

ISO 4028 A286 screws with hexagon socket and pin

A286 Screws

ISO 4029 A286 screws with hexagon socket and serrated

A286 Screws

ISO 2342 A286 Slotted set screws with shank

A286 Screws

EN 24766 A286 Slotted set screws with flat point

A286 Screws

EN 27434 A286 set screws with slot and point

A286 Screws

EN 27435 A286 set screws with mortise and tenon

A286 Screws

EN 27436 A286 Slotted set screws with cup point

A286 Screws

CSN 02 1187 A286 screws with hexagon socket flat point
A286 Tapping Screws

A286 Screws

ISO 1479 A286 Hexagon head tapping screws, form C 

A286 Screws

ISO 1479 A286 F Hexagon head tapping screws, form F

A286 Screws

ISO 1481 A286 Flathead-tapping screws, form C

A286 Screws

ISO 1481 A286 F Flathead-tapping screws, form F

A286 Screws

ISO 1482 A286 Senk-tapping screws, form C

A286 Screws

ISO 1482 A286 F Senk-tapping screws, form F

A286 Screws

ISO 1483 A286 Slotted-tapping screws, form C

A286 Screws

ISO 1483 A286 F Slotted-tapping screws, form F

A286 Screws

ISO 7049 A286 CH pan head tapping screws Phillips

A286 Screws

ISO 7049 A286 CZ pan head tapping screws Phillips

A286 Screws

ISO 7049 A286 FH pan head tapping screws Phillips

A286 Screws

ISO 7049 A286 FZ pan head tapping screws Phillips

A286 Screws

ISO 7050 A286 CH Senk-tapping screws Phillips

A286 Screws

ISO 7050 A286 CZ Senk-tapping screws Phillips

A286 Screws

ISO 7050 A286 FH Senk-tapping screws Phillips

A286 Screws

ISO 7050 A286 FZ Senk-tapping screws Phillips

A286 Screws

ISO 7051 A286 CH raised countersunk head tapping screws Phillips

A286 Screws

ISO 7051 A286 CZ raised countersunk head tapping screws Phillips

A286 Screws

ISO 7051 A286 FH raised countersunk head tapping screws Phillips

A286 Screws

ISO 7051 A286 FZ raised countersunk head tapping screws Phillips

A286 Screws

ISO 15480 A286 Hexagon Screws with collar with tapping screw thread

A286 Screws

ISO 15481 A286 H Flathead Screws with Phillips, Form H

A286 Screws

ISO 15483 A286 H Raised head Screws with Phillips with tapping screw thread, Form H

A286 Screws

ISO 15483 A286 Z Raised head Screws with Phillips with tapping screw thread, form Z

A286 Screws

ISO 15482 A286 H Senk-drilling screws with Phillips with tapping screw thread, Form H

A286 Screws

ISO 15482 A286 Z Senk-drilling screws with Phillips with tapping screw thread, form Z
A286 Countersunk Screws

A286 Screws

ISO 10642 A286 countersunk screws with hexagon socket

A286 Screws

ISO 14584 A286 flat-head screws with hexagon socket

A286 Screws

ISO 2009 A286 Slotted countersunk head screws (common head style) product class A

A286 Screws

ISO 7046-1 A286 H countersunk screws (common head) with Phillips, form H – Product grade A

A286 Screws

ISO 7046-1 A286 Z countersunk screws (common head) with Phillips, form Z – Product grade A

A286 Screws

ISO 7046-2 A286 H1 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, Form H – Series 1

A286 Screws

ISO 7046-2 A286 H2 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, Form H – Series 2

A286 Screws

ISO 7046-2 A286 Z1 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, form Z – Series 1

A286 Screws

ISO 7046-2 A286 Z2 Countersunk head screw (unit head) – Product grade A – Part 2: Strength class 8.8, form Z – Series 2

A286 Screws

ISO 2010 A286 Raised Countersunk head slot (unit head) Classification A

A286 Screws

ISO 7047 A286 H Raised Countersunk head (unit head) with Phillips – product class A, Form H

A286 Screws

ISO 7047 A286 Z Raised Countersunk head (unit head) with Phillips – product class A, Form Z
     
A286 Other Screws

A286 Screws

CSN 02 1121 A286 Four head bolts with dog point

A286 Screws

CSN 02 1122 A286 Square heads bolts with collar and half dog point with rounded end

A286 Screws

CSN 02 1161 A286 Screws, tall form

A286 Screws

CSN 02 1161 A286 Screws, tall form

A286 Screws

CSN 02 1162 A286 Screws, low form

A286 Screws

CSN 02 1167 A286 eyebolts

A286 Screws

CSN 02 1174 A286 Studs – = 1d

A286 Screws

CSN 02 1174 A286 Studs – = 1d

A286 Screws

CSN 02 1176 A286 Studs – = 1.25d

A286 Screws

CSN 02 1176 A286 Studs – = 1.25d

A286 Screws

CSN 02 1178 A286 Studs – = 2d

A286 Screws

CSN 02 1178 A286 Studs – = 2d

A286 Screws

CSN 02 1341 A286 screws T (M10 – M36x3)

A286 Screws

CSN 02 1341 A286 screws T (M42x3 – M100x4)

 

Type of A286 Bolts

A286 Hex Bolts

A286 Hex Bolts

EN 1665 A286 F Hexagon bolts with flange, heavy series, Form F

A286 Hex Bolts

ISO 4014 A286 Hexagon bolts with shaft, product classes A and B

A286 Hex Bolts

ISO 4017 A286 Hexagon bolts with thread to the head – Product grades A and B 

A286 Hex Bolts

ISO 8676 A286 Hexagon bolts with thread to head, metric fine thread

A286 Hex Bolts

ISO 8765 A286 Hexagon head bolts with shank, metric fine thread

A286 Hex Bolts

ISO 4018 A286 Hexagon bolts with thread to head

A286 Hex Bolts

ISO 4016 A286 Hexagon bolts with shaft, product class C

A286 Hex Bolts

EN 24015 A286 Hexagon head bolts with shank, relieved shank

A286 Hex Bolts

CSN 02 1104 A286 Bright hexagon bolts with hole in the head

A286 Hex Bolts

CSN 02 1105 A286 Bright hexagon bolts with slot

A286 Hex Bolts

CSN 02 1105 A286 B Bright hexagon bolts with slot
       

Type of A286 Washers

A286 Washers

A286 Washers

ISO 7090 A286 Flat washers normal series

A286 Washers

ISO 7089 A286 Flat washers normal series

A286 Washers

ISO 7091 A286 Flat washers normal series

A286 Washers

ISO 7092 A286 Flat washers small series

A286 Washers

ISO 7093-1 A286 Plain washers, large series

A286 Washers

ISO 7093-2 A286 Plain washers, large series

A286 Washers

ISO 7094 A286 Flat washers, Extra large series

A286 Washers

ISO 10673 A286 L Plain washers for bolts

A286 Washers

ISO 10673 A286 N Plain washers for bolts

A286 Washers

ISO 10673 A286 S Plain washers for bolts

A286 Washers

EN 28738 A286 Washers for clevis pins

A286 Washers

CSN 02 1740 A286 spring rings with square cross section

A286 Washers

CSN 02 1741 A286 spring rings with rectangular cross-section
   

ASME SA 286 Fasteners Prices

A286 Fasteners
US $9.00-$10.00 / Kilogram
1000 Kilograms (Min. Order)
SILICON BRONZE FASTENERS, CSILICON BRONZE HEX BOLTS
US $1.20-$1.50 / Piece
5 Pieces (Min. Order)
A286 Fasteners
US $9.00-$10.00 / Kilogram
1000 Kilograms (Min. Order)
silicon bronze bolts fastener manufactures suppliers exporters
US $0.01-$1.00 / Piece
400 Pieces (Min. Order)
colorful silicone rubber fasteners
US $0.01-$0.20 / Piece
5000 Pieces (Min. Order)
A286 Tap Hex Stud Bolt
US $0.10-$50.00 / Piece
1000 Pieces (Min. Order)
cheap wholesale silicon bronze bolt
US $0.0002-$0.005 / Piece
5000 Pieces (Min. Order)
Stainless Steel Silicone Bronze Conical Washer
US $0.001-$0.10 / Piece
10000 Pieces (Min. Order)
silicone bronze bolt
US $0.001-$0.005 / Piece
30000 Pieces (Min. Order)
A286 Hex Cap Screws
US $0.01-$0.10 / Pieces
10000 Pieces (Min. Order)
A286 Hex Machine Nut
US $0.01-$0.30 / Piece
10000 Pieces (Min. Order)
supplier quality silicon bronze hex bolts
US $0.01-$0.50 / Piece
3000 Pieces (Min. Order)
silicon bronze bolts
US $0.01-$1.00 / Piece
400 Kilograms (Min. Order)
Silicone Bronze Hex Flange Nuts
US $0.001-$0.10 / Piece
10000 Pieces (Min. Order)
A286 Hex Finish Nut
US $0.01-$0.30 / Piece
10000 Pieces (Min. Order)
supplier silicon bronze hex nut
US $0.005-$0.10 / Piece
1000 Pieces (Min. Order)
A286 Square Neck Carriage Bolts
US $0.01-$0.10 / Pieces
10000 Pieces (Min. Order)
High Quality!silicon bronze hex nut
US $0.005-$0.08 / Piece
1000 Pieces (Min. Order)
C65500 Low A286 "B"
US $9.00-$10.00 / Kilogram
1000 Kilograms (Min. Order)
silicon bronze bolts
US $0.01-$1.00 / Piece
400 Pieces (Min. Order)
A286 For Fasteners
US $7.50-$8.50 / Kilogram
1000 Kilograms (Min. Order)
Silicon bronze nut
US $0.0001-$0.005 / Piece
100000 Pieces (Min. Order)
C65500 A286 Heavy hex nut
US $1.50-$1.80 / Piece
1 Piece (Min. Order)
Silicone Bronze Metal Insert Nuts Self Locking
US $0.001-$0.10 / Piece
10000 Pieces (Min. Order)
silicon bronze bolt
US $0.01-$0.20 / Piece
1000 Pieces (Min. Order)
supplier silicon bronze hex nut
US $0.01-$0.40 / Piece
1000 Pieces (Min. Order)
High A286 "A" Rods
US $9.00-$10.00 / Kilogram
1000 Kilograms (Min. Order)
silicon bronze bolt
US $0.05-$0.28 / Piece
1000 Pieces (Min. Order)
Silicon Aluminium Bronze Rods
US $9.00-$10.00 / Kilogram
1000 Kilograms (Min. Order)
Silicon Aluminum Bronze Rods
US $9.00-$10.00 / Kilogram
1000 Kilograms (Min. Order)
A286 Hexagon Bar
US $25.00-$35.00 / Kilogram
100 Kilograms (Min. Order)
Silicon bronze wood screws fastener
US $0.03-$10.00 / Piece
50000 Pieces (Min. Order)

ASTM Standards Of A286 Fasteners (inch series)

B18.1.1 Small Solid Rivets B18.8.1 Clevis Pins and Cotter Pins
B18.1.2 Large Rivets B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
B18.2.1 Square and Hex Bolts and Screws B18.9 Plow Bolts
B18.2.2 Square and Hex Nuts B18.10 Track Bolts and Nuts
B18.2.6 Fasteners for use in Structural Applications B18.11 Miniature Screws
B18.3 Socket Cap, Shoulder and Set Screws B18.13 Screw and Washer Assemblies (Sems)
B18.5 Round Head Bolts B18.15 Forged Eyebolts
B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws B18.17 Wing Nuts, Thumb Screws and Wing Screws
B18.6.3 Machine Screws and Machine Screw Nuts B18.21.1 Lock Washers
B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws B18.22.1 Plain Washers
B18.7 General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps B18.23.1 Beveled Washers

Available A286 Fasteners Other Types

  • A286 Nuts
  • A286 Washers Exporter
  • A286 Fender Washer
  • ASTM A286 Cap Screw
  • A286 Square Nut Exporter
  • A286 Bolts Manufacturer
  • A286 Double Ended Stud
  • A286 Square Bolts Supplier
  • A286 Lock Nut Supplier
  • A286 Flat Washer
  • A286 Studbolt
  • A286 Bolts Supplier
  • A286 Stud Bolt
  • A286 Bolts Manufacturer
  • A286 Foundation Bolts
  • A286 Pan Head Screw Stockist
  • A286 Pan Head Screw
  • A286 Tie Bar Exporter
  • A286 Punched Washer Distributor
  • A286 Coupler Nuts
  • A286 Locking Nuts Manufacturer
  • ISO Certified Countersunk Slotted Screw

Coatings We Provide For A286 Fasteners

Value Added Services Provided By Steel Tubes India While Buying A286 Fasteners

  • Government and Private Laboratory Testing
  • Very Quick Delivery
  • Mill Test Report/ Digital Mill Test Report in Accordance with EN10204 NACE 3.1, NACE 3.2
  • High Pressure Sustainability
  • Test certificate from ISO 17025 Standards Laboratory
  • Same Day Shipping of the Goods
  • Impeccable Surface Finish
  • Product Replacement Warranty
  • After Sales Support and Service
  • World Class Buying Experience
  • Largest Stockholder in the Country
  • Stringent Quality Testing and Control
  • 3rd Party Inspection

ASME SA286 Fasteners Popular Searches

A286 Bolt/ Nut strength, A286 Bolt specification, A286 Nut sizes, A286 Bolt manufacturers in India, A286 Nut, A286 Bolt price list, A286 Nut size chart, A286 Bolt strength vs grade 8, A286 Nut torque chart, A286 and Nut shear strength table, shear strength of A286 655, A286 Nut shear strength chart, A286 strength calculator, A286 Nut strength chart, A286 tensile strength chart, will A286 rust, A286 magnetic, A286 grades chart, A286 Bolt/Nut grades chart, A286 Bolt specifications, A286 Nut grade, machine A286 Bolt, A286 Nut home depot, A286 Bolt lowes, A286 Bolt self tapping, A286 wood Nut flat head, 4 inch A286 Nut, A286 pan head wood Bolt, A286 Nut manufacturers in delhi, omni A286 Bolt/Nut price list, A286 Bolt/Nut manufacturers in rajkot, Bolt price list in india, A286 omni Nut price list, A286 manufacturers in chandigarh, price of A286 Nut in india, apl A286 fasteners price list, A286 size table, A286 Nut and nut size table, A286 Nut & Bolt size guide, A286 Nut size chart pdf, A286 size chart standard, A286 Nut size chart metric, A286 / Nut size chart in mm

A286 Fasteners Supplier

Bengaluru, Al Khobar, Riyadh, London, Baroda, Granada, Port-of-Spain, Coimbatore, Mexico City, New York, Chennai, Ahmedabad, Houston, Ulsan, Mumbai, Moscow, Ranchi, Bhopal, Thiruvananthapuram, Secunderabad, Muscat, Hyderabad, Bangkok, Indore, Melbourne, Thane, La Victoria, Pune, Lagos, Pimpri-Chinchwad, Ernakulam, Nagpur, Abu Dhabi, Karachi, Montreal, Istanbul, Manama, Dubai, Jamshedpur, Toronto, Brisbane, Petaling Jaya, Jaipur, Navi Mumbai, Atyrau, Jeddah, Ludhiana, Bogota, Dammam, Surat, Hong Kong, New Delhi, Calgary, Visakhapatnam, Kanpur, Gurgaon, Kolkata, Gimhae-si, Vung Tau, Caracas, Ahvaz, Colombo, Kuala Lumpur, Nashik, Busan, Ho Chi Minh City, Singapore, Vadodara, Rio de Janeiro, Sydney, Santiago, Chiyoda, Kuwait City, Howrah, Hanoi, Courbevoie, Ankara, Aberdeen, Algiers, Cairo, Chandigarh, Dallas, Milan, Noida, Tehran, Perth, Rajkot, Lahore, Geoje-si, Jakarta, Haryana, Edmonton, Los Angeles, Faridabad, Seoul, Madrid, Sharjah, Doha, Al Jubail

A286 Fasteners Exporter

Malaysia, Germany, Venezuela, Afghanistan, Ireland, United Arab Emirates, Jordan, Zimbabwe, Indonesia, Saudi Arabia, Ukraine, Czech Republic, Pakistan, Kuwait, Iraq, Iran, Bahrain, Algeria, Argentina, Slovakia, Qatar, Colombia, Russia, Lebanon, Kazakhstan, Ghana, Turkey, South Africa, Oman, Belarus, Gambia, Switzerland, Bhutan, Bulgaria, Morocco, Nepal, Singapore, China, Lithuania, Italy, Kenya, Japan, Sweden, Bangladesh, Namibia, New Zealand, Belgium, Taiwan, Libya, Hong Kong, Mexico, Poland, Norway, Puerto Rico, Thailand, Gabon, Estonia, Vietnam, India, Tibet, Australia, Nigeria, Angola, Sri Lanka, Brazil, Costa Rica, South Korea, Finland, Philippines, Iran, Chile, Trinidad & Tobago,Tunisia, Denmark, Hungary, Croatia, Azerbaijan, Ecuador, Nigeria, Chile, Romania, Mongolia, Greece, Spain, United States, Canada, Macau, Israel, Serbia, Netherlands, Egypt, France, Bolivia, Peru, Mexico, United Kingdom, Austria, Portugal, Yemen, Poland


A286 Fasteners Inventory

Call today, and find out why Steel Tubes India is the choice for so many users of A286 Fasteners.

Tel: +(91)-(22)-61432000 or send an Email to stindia@stindia.com